Code Definition

P0133 — O2 Sensor Circuit Slow Response (Bank 1 Sensor 1)

System: Powertrain  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About P0133

P0133 is a generic (obd-ii standard) powertrain diagnostic trouble code. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P0133 is stored, the module has detected a signal or supply voltage lower than the expected operating range; a bank-specific fault, meaning it applies only to one cylinder bank of a multi-bank engine; and a sensor-related fault — the reported value from the named sensor is out of spec.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

Because P0133 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

The P0133 fault code is set when the Engine Control Module (ECM) detects that the oxygen sensor in Bank 1, Sensor 1, has a slower response time than expected. This sensor is typically located upstream in the exhaust system, before the catalytic converter. The slow response can be attributed to the sensor’s delayed reaction in adjusting its voltage output in response to changes in the oxygen content of the exhaust gas. This delay can affect the ECM’s ability to accurately control the air-fuel mixture. Factors contributing to a slow response might include a sensor that is aging or contaminat...

Join TaT to view the complete code information and diagnostic details.

Quick Facts