Code Definition

P0151 — O2 Sensor Circuit Low Voltage (Bank 2 Sensor 1)

System: Powertrain  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About P0151

P0151 is a generic (obd-ii standard) powertrain diagnostic trouble code. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P0151 is stored, the module has detected a signal or supply voltage lower than the expected operating range; a bank-specific fault, meaning it applies only to one cylinder bank of a multi-bank engine; and a sensor-related fault — the reported value from the named sensor is out of spec.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

Because P0151 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

The P0151 fault code is set when the Engine Control Module (ECM) detects a lower than expected voltage output from the oxygen sensor located in Bank 2, Sensor 1. This sensor is typically situated upstream in the exhaust system, before the catalytic converter, on the side of the engine known as Bank 2. A low voltage signal from this sensor usually suggests that there is a higher than expected level of oxygen in the exhaust, indicative of a lean air-fuel mixture. Causes for this low voltage output can include a faulty oxygen sensor, problems in the wiring or connectors, or exhaust leaks that int...

Join TaT to view the complete code information and diagnostic details.

Quick Facts