Code Definition

P0156 (27) — Oxygen sensor signal error - Bank 2 - sensor 2

System: Powertrain  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About P0156

P0156 is a generic (obd-ii standard) powertrain diagnostic trouble code. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P0156 is stored, the module has detected a bank-specific fault, meaning it applies only to one cylinder bank of a multi-bank engine; and a sensor-related fault — the reported value from the named sensor is out of spec.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

Because P0156 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

The P0156 fault code is set when the Engine Control Module (ECM) detects a malfunction in the circuit of the oxygen sensor located in Bank 2, Sensor 2. This sensor is typically positioned downstream in the exhaust system, after the catalytic converter, on the side of the engine designated as Bank 2. The malfunction might involve the sensor not producing the correct voltage range or issues with the wiring or connectors linking the sensor to the ECM. The ECM uses this downstream sensor primarily to monitor the efficiency of the catalytic converter. Any malfunctions in the sensor circuit can lead...

Join TaT to view the complete code information and diagnostic details.

Quick Facts