Code Definition

C1507 — Traction Control of Brake Exceeds Time-Out

System: Chassis  |  Type: Manufacturer-Specific  |  Make: Generic

About C1507

C1507 is a manufacturer-specific chassis diagnostic trouble code. It belongs to the C-prefix family of codes, which covers chassis, braking, steering, suspension, or stability-control faults.

Scanning & clearing: Chassis (C) codes are stored in the ABS, traction control, or stability-control modules. An enhanced or OEM-level scan tool is usually required to read and clear them.

C1507 is a manufacturer-specific code. The same code string on a different make may have a different meaning. Always confirm the code's definition against the vehicle's service information for the specific make and model under test.

Code Information

The brake based traction control function uses the ABS hydraulic unit to apply brake pressure to a spinning drive wheel so torque is transferred to the wheel with grip. Code C1507 is set when the control module detects that a traction control brake application has continued for longer than the calibrated time limit. The module then suspends traction control operation to protect the brake components and hydraulic unit pump from overheating. This can occur as a normal protective response during prolonged wheel spin in mud, snow, or sand, but it can also indicate a wheel speed signal fault or a d...

Join TaT to view the complete code information and diagnostic details.

Quick Facts