Code Definition

C1756 — Air Suspension Front Height Sensor High (SE) Signal Circuit Failure

System: Chassis  |  Type: Manufacturer-Specific  |  Make: Ford

About C1756

C1756 is a manufacturer-specific chassis diagnostic trouble code recorded for Ford vehicles. It belongs to the C-prefix family of codes, which covers chassis, braking, steering, suspension, or stability-control faults.

When C1756 is stored, the module has detected a signal or supply voltage higher than the expected operating range; and a sensor-related fault — the reported value from the named sensor is out of spec.

Scanning & clearing: Chassis (C) codes are stored in the ABS, traction control, or stability-control modules. An enhanced or OEM-level scan tool is usually required to read and clear them.

C1756 is a manufacturer-specific code. The same code string on a different make may have a different meaning. Always confirm the code's definition against the vehicle's service information for the specific make and model under test.

Code Information

DTC C1756 is a Ford air suspension code indicating that the suspension control module has detected the front height sensor signal reading above its expected range, which Ford terms a high signal circuit failure. The front height sensor reports the distance between the chassis and the front suspension so the module can maintain correct ride height by filling or venting the front air springs. The module supplies the sensor with power and ground and monitors the signal line continuously, and if the signal voltage rises above the plausible window, typically due to a short to power, an open ground,...

Join TaT to view the complete code information and diagnostic details.

Quick Facts