Code Definition

B1267 — Servo Motor Airintake Right Circuit Failure

System: Body  |  Type: Manufacturer-Specific  |  Make: Generic

About B1267

B1267 is a manufacturer-specific body diagnostic trouble code. It belongs to the B-prefix family of codes, which covers body, interior, airbag, or comfort-electronics faults.

When B1267 is stored, the module has detected an electrical-circuit fault in the wiring, connector, or driver associated with the named component.

Scanning & clearing: Body (B) codes are often stored in the body control module, airbag module, or climate module. A basic OBD-II tool usually will not read body codes — an enhanced or OEM-level scan tool is typically required.

B1267 is a manufacturer-specific code. The same code string on a different make may have a different meaning. Always confirm the code's definition against the vehicle's service information for the specific make and model under test.

Code Information

The climate control module monitors the right air intake servo motor through bidirectional drive lines and a position feedback signal from an internal potentiometer. DTC B1267 is set when the module commands the servo to move the right air intake door but does not see the expected feedback voltage change, sees a feedback value outside the valid range, or detects an electrical short or open on the motor command circuit. The right air intake servo positions the recirculation flap on the right side of the HVAC case to select between fresh outside air and recirculated cabin air, often as part of a...

Join TaT to view the complete code information and diagnostic details.

Quick Facts