Code Definition

B1410 — Driver Power Window Motor Circuit Failure

System: Body  |  Type: Manufacturer-Specific  |  Make: Generic

About B1410

B1410 is a manufacturer-specific body diagnostic trouble code. It belongs to the B-prefix family of codes, which covers body, interior, airbag, or comfort-electronics faults.

When B1410 is stored, the module has detected an electrical-circuit fault in the wiring, connector, or driver associated with the named component.

Scanning & clearing: Body (B) codes are often stored in the body control module, airbag module, or climate module. A basic OBD-II tool usually will not read body codes — an enhanced or OEM-level scan tool is typically required.

B1410 is a manufacturer-specific code. The same code string on a different make may have a different meaning. Always confirm the code's definition against the vehicle's service information for the specific make and model under test.

Code Information

The Body Control Module (BCM) or Door Control Module (DCM) controls power window operation through the driver master switch, supplying battery voltage to the window motor in the up or down direction and monitoring current draw and circuit voltage during operation. DTC B1410 is a general circuit failure code set when the module detects an out of range condition during a window run cycle, including excessive current draw from a binding or shorted motor, no current draw indicating an open circuit, or signal feedback outside calibrated thresholds. This is typically caused by a worn out window moto...

Join TaT to view the complete code information and diagnostic details.

Quick Facts