Code Definition

B1954 — Seat Front Up/Down Potentiometer Feedback Circuit Failure

System: Body  |  Type: Manufacturer-Specific  |  Make: Ford

About B1954

B1954 is a manufacturer-specific body diagnostic trouble code recorded for Ford vehicles. It belongs to the B-prefix family of codes, which covers body, interior, airbag, or comfort-electronics faults.

When B1954 is stored, the module has detected an electrical-circuit fault in the wiring, connector, or driver associated with the named component.

Scanning & clearing: Body (B) codes are often stored in the body control module, airbag module, or climate module. A basic OBD-II tool usually will not read body codes — an enhanced or OEM-level scan tool is typically required.

B1954 is a manufacturer-specific code. The same code string on a different make may have a different meaning. Always confirm the code's definition against the vehicle's service information for the specific make and model under test.

Code Information

The B1954 code is set when the Driver Seat Module (DSM) or seat memory module detects a failure in the feedback signal from the front cushion up/down potentiometer. This potentiometer rides with the front cushion lift mechanism and reports the current vertical position of the front of the cushion (the cushion tilt axis) back to the module, which uses the value to drive memory recall, prevent travel past mechanical limits, and coordinate motion with the rear lift, slide, and recline axes. When the module sees no signal, a signal stuck at the supply rail, or a signal that does not respond when t...

Join TaT to view the complete code information and diagnostic details.

Quick Facts