Code Definition

B2167 — Seat Horizontal Motor Memory Position Out of Range

System: Body  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About B2167

B2167 is a generic (obd-ii standard) body diagnostic trouble code. It belongs to the B-prefix family of codes, which covers body, interior, airbag, or comfort-electronics faults.

When B2167 is stored, the module has detected a plausibility fault — the measured value is in the electrical range but is not consistent with expected operating behaviour.

Scanning & clearing: Body (B) codes are often stored in the body control module, airbag module, or climate module. A basic OBD-II tool usually will not read body codes — an enhanced or OEM-level scan tool is typically required.

Because B2167 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

DTC B2167 sets when the seat memory module detects that the stored memory position for the horizontal (fore and aft slide) motor is outside the expected operating range. The horizontal motor position is monitored via either a hall effect encoder or a potentiometer feedback signal as the motor moves the seat forward and rearward on its rails. When the driver attempts to recall a memory position, the module compares the stored target value against the current sensor reading and the known mechanical travel limits, and sets this code if the stored value falls outside acceptable bounds. When this c...

Join TaT to view the complete code information and diagnostic details.

Quick Facts