Code Definition

B2194 — Window Passenger Rear Remote Down Switch Short to Battery

System: Body  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About B2194

B2194 is a generic (obd-ii standard) body diagnostic trouble code. It belongs to the B-prefix family of codes, which covers body, interior, airbag, or comfort-electronics faults.

When B2194 is stored, the module has detected a short-circuit (voltage pulled to ground or to supply) in the monitored circuit.

Scanning & clearing: Body (B) codes are often stored in the body control module, airbag module, or climate module. A basic OBD-II tool usually will not read body codes — an enhanced or OEM-level scan tool is typically required.

Because B2194 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

The Body Control Module (BCM) monitors the door window switch inputs to control power window operation for each door. DTC B2194 sets when the BCM detects an unexpected battery voltage on the rear passenger window remote down command circuit, which is the input that drives the right rear window down from the driver master window switch. This circuit normally rests at a known reference state and only sees a discrete switched input when the rear passenger down rocker is pressed at the master switch, so a constant or stray battery voltage tells the BCM the input is shorted. When this code is activ...

Join TaT to view the complete code information and diagnostic details.

Quick Facts