Code Definition

B2234 — Airbag Driver Inflator Circuit Resistance Low on Squib - Loop #2

System: Body  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About B2234

B2234 is a generic (obd-ii standard) body diagnostic trouble code. It belongs to the B-prefix family of codes, which covers body, interior, airbag, or comfort-electronics faults.

When B2234 is stored, the module has detected a signal or supply voltage lower than the expected operating range.

Scanning & clearing: Body (B) codes are often stored in the body control module, airbag module, or climate module. A basic OBD-II tool usually will not read body codes — an enhanced or OEM-level scan tool is typically required.

Because B2234 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

DTC B2234 is set by the Supplemental Restraint System (SRS) control module when it detects a low resistance condition across the driver airbag igniter (squib) on Loop #2, indicating a short across the pyrotechnic element or a leakage path between the two loop conductors. Loop #2 corresponds to the second igniter stage of a dual stage driver airbag, fired by the SRS module during higher severity impacts to provide a more aggressive deployment. The SRS module passes a small diagnostic current through each squib and measures the resulting voltage drop to calculate resistance, and when the measure...

Join TaT to view the complete code information and diagnostic details.

Quick Facts