Code Definition

B2334 — Column Tilt Feedback Potentiometer Circuit Short to Battery

System: Body  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About B2334

B2334 is a generic (obd-ii standard) body diagnostic trouble code. It belongs to the B-prefix family of codes, which covers body, interior, airbag, or comfort-electronics faults.

When B2334 is stored, the module has detected a short-circuit (voltage pulled to ground or to supply) in the monitored circuit.

Scanning & clearing: Body (B) codes are often stored in the body control module, airbag module, or climate module. A basic OBD-II tool usually will not read body codes — an enhanced or OEM-level scan tool is typically required.

Because B2334 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

DTC B2334 indicates that the column control module has detected the column tilt feedback potentiometer signal pulled up to battery voltage, well above the normal 0V to 5V operating range of the sensor. The tilt potentiometer normally returns a signal that varies smoothly between approximately 0.5V and 4.5V as the steering column moves through its vertical travel. When the module reads battery voltage (typically 9V or higher) on the signal pin, it identifies a short to a power feed somewhere in the harness, the connector, or inside the potentiometer assembly. With this code set, the power colum...

Join TaT to view the complete code information and diagnostic details.

Quick Facts