Code Definition

B2362 — Remote Open/Close signal Circuit Short to Ground

System: Body  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About B2362

B2362 is a generic (obd-ii standard) body diagnostic trouble code. It belongs to the B-prefix family of codes, which covers body, interior, airbag, or comfort-electronics faults.

When B2362 is stored, the module has detected an open (broken or disconnected) electrical path in the monitored circuit; and a short-circuit (voltage pulled to ground or to supply) in the monitored circuit.

Scanning & clearing: Body (B) codes are often stored in the body control module, airbag module, or climate module. A basic OBD-II tool usually will not read body codes — an enhanced or OEM-level scan tool is typically required.

Because B2362 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

On vehicles with remote open and close features, the body control module monitors a signal input from the remote keyless entry receiver or comfort module that commands convenience features such as window down or sunroof close from the remote. DTC B2362 sets when the body control module detects the remote open or close signal circuit is being pulled to ground continuously, indicating a short to ground condition that holds the input active even when no remote command is being sent. The signal input typically rests at a defined voltage level provided by a pull up resistor in the module, and is pu...

Join TaT to view the complete code information and diagnostic details.

Quick Facts