Code Definition

B2367 — Power Sliding Door Override Switch Input Ckt Short to Gnd

System: Body  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About B2367

B2367 is a generic (obd-ii standard) body diagnostic trouble code. It belongs to the B-prefix family of codes, which covers body, interior, airbag, or comfort-electronics faults.

When B2367 is stored, the module has detected a short-circuit (voltage pulled to ground or to supply) in the monitored circuit.

Scanning & clearing: Body (B) codes are often stored in the body control module, airbag module, or climate module. A basic OBD-II tool usually will not read body codes — an enhanced or OEM-level scan tool is typically required.

Because B2367 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

On vehicles equipped with power sliding doors, an override switch allows the driver or owner to disable the power operation, commonly for child safety reasons or when towing or servicing. The override switch is monitored by the body control module or sliding door control module, with the input normally resting at a pulled up reference voltage and pulled to ground when the override is active. DTC B2367 sets when the controlling module detects the override switch input circuit is being held to ground continuously, suggesting either a stuck switch or a short to ground in the harness. When this co...

Join TaT to view the complete code information and diagnostic details.

Quick Facts