Code Definition

B2434 — Drivers Seat Belt Buckle Switch Circuit Short to Ground

System: Body  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About B2434

B2434 is a generic (obd-ii standard) body diagnostic trouble code. It belongs to the B-prefix family of codes, which covers body, interior, airbag, or comfort-electronics faults.

When B2434 is stored, the module has detected a short-circuit (voltage pulled to ground or to supply) in the monitored circuit.

Scanning & clearing: Body (B) codes are often stored in the body control module, airbag module, or climate module. A basic OBD-II tool usually will not read body codes — an enhanced or OEM-level scan tool is typically required.

Because B2434 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

The body control module monitors the driver's seat belt buckle switch to determine whether the belt is latched or unlatched, controlling the seat belt warning chime and indicator and on some platforms supplying belt status to the supplemental restraint and occupant classification systems. DTC B2434 is set when the module detects the buckle switch signal input is held low at ground potential continuously, instead of toggling between the latched and unlatched states. Because the switch closes to ground when the belt is latched, a continuous ground reading indicates the signal wire is shorted to ...

Join TaT to view the complete code information and diagnostic details.

Quick Facts