Code Definition

B2435 — Drivers Seat Belt Buckle Switch Resistance out of Range

System: Body  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About B2435

B2435 is a generic (obd-ii standard) body diagnostic trouble code. It belongs to the B-prefix family of codes, which covers body, interior, airbag, or comfort-electronics faults.

When B2435 is stored, the module has detected a plausibility fault — the measured value is in the electrical range but is not consistent with expected operating behaviour.

Scanning & clearing: Body (B) codes are often stored in the body control module, airbag module, or climate module. A basic OBD-II tool usually will not read body codes — an enhanced or OEM-level scan tool is typically required.

Because B2435 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

The body control module monitors the driver's seat belt buckle switch and uses the measured circuit resistance to determine whether the belt is latched or unlatched. The switch is engineered to swing between a defined low resistance closed state and a defined high resistance open state, with specific thresholds set by the manufacturer. DTC B2435 is set when the module reads a resistance value that falls outside both the expected latched and unlatched windows, indicating the circuit is neither cleanly closed nor cleanly open. The condition often points at corroded terminals, partial connector s...

Join TaT to view the complete code information and diagnostic details.

Quick Facts