Code Definition

B2501 — LF LAMP LOW BEAM CIRCUIT Failure

System: Body  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About B2501

B2501 is a generic (obd-ii standard) body diagnostic trouble code. It belongs to the B-prefix family of codes, which covers body, interior, airbag, or comfort-electronics faults.

When B2501 is stored, the module has detected a signal or supply voltage lower than the expected operating range.

Scanning & clearing: Body (B) codes are often stored in the body control module, airbag module, or climate module. A basic OBD-II tool usually will not read body codes — an enhanced or OEM-level scan tool is typically required.

Because B2501 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

The Body Control Module (BCM) or dedicated front lighting module controls the left front low beam headlamp by switching battery voltage or ground to the bulb on demand, monitored via current sensing or a feedback line to confirm the lamp is operational. DTC B2501 is set when the BCM detects an out of specification condition on the left front low beam circuit, typically when commanded ON the expected current draw or feedback voltage is missing, indicating an open bulb, open wiring, or a high resistance fault somewhere in the supply or return path. The BCM logs this code so the driver can be ale...

Join TaT to view the complete code information and diagnostic details.

Quick Facts