Code Definition

B2567 — Reverse Mirror Output Circuit Failure

System: Body  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About B2567

B2567 is a generic (obd-ii standard) body diagnostic trouble code. It belongs to the B-prefix family of codes, which covers body, interior, airbag, or comfort-electronics faults.

When B2567 is stored, the module has detected an electrical-circuit fault in the wiring, connector, or driver associated with the named component.

Scanning & clearing: Body (B) codes are often stored in the body control module, airbag module, or climate module. A basic OBD-II tool usually will not read body codes — an enhanced or OEM-level scan tool is typically required.

Because B2567 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

The Body Control Module or driver door module monitors the reverse mirror output circuit, which commands the outside mirrors to tilt downward when reverse gear is selected to give the driver a clearer view of the kerb or rear wheels while reversing. DTC B2567 is set when the module detects a circuit failure on the reverse mirror tilt output, indicating an open circuit, a short to ground, or a short to voltage on the wire that drives the mirror tilt motor or its associated relay. The mirror motor itself is a small reversible DC motor with position memory in vehicles with memory mirrors, and the...

Join TaT to view the complete code information and diagnostic details.

Quick Facts