Code Definition

P1347 — Camshaft position sensor 2 bank2/crankshaft position sensor out of sequence

System: Powertrain  |  Type: Manufacturer-Specific  |  Make: Audi

About P1347

P1347 is a manufacturer-specific powertrain diagnostic trouble code recorded for Audi vehicles. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P1347 is stored, the module has detected a sensor-related fault — the reported value from the named sensor is out of spec.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

P1347 is a manufacturer-specific code. The same code string on a different make may have a different meaning. Always confirm the code's definition against the vehicle's service information for the specific make and model under test.

Code Information

On a V configuration engine each cylinder bank has its own camshaft position sensor, and the Engine Control Module checks each one against the crankshaft position signal to confirm the mechanical relationship between that bank's camshaft and the crankshaft. The reference gap on the crankshaft reluctor wheel and the camshaft edge should arrive in a fixed relationship set by the engine timing. DTC P1347 is stored when the module finds the bank 2 camshaft position signal out of sequence with the crankshaft signal, meaning both signals are present and electrically healthy but no longer correctly r...

Join TaT to view the complete code information and diagnostic details.

Quick Facts