Code Definition

P1910 — No signal from Engine Control Module 2

System: Powertrain  |  Type: Manufacturer-Specific  |  Make: Volkswagen

About P1910

P1910 is a manufacturer-specific powertrain diagnostic trouble code recorded for Volkswagen vehicles. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

P1910 is a manufacturer-specific code. The same code string on a different make may have a different meaning. Always confirm the code's definition against the vehicle's service information for the specific make and model under test.

Code Information

This fault code is triggered when the primary engine control module (ECM 1) or another system detects a loss of communication with ECM 2. In vehicles with dual ECM configurations, both modules must exchange data for proper engine management. A loss of signal from ECM 2 can result in reduced performance, limp mode, or system malfunctions.

Quick Facts