Code Definition

P0717 — Input/Turbine Speed Sensor Circuit No Signal

System: Powertrain  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About P0717

P0717 is a generic (obd-ii standard) powertrain diagnostic trouble code. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P0717 is stored, the module has detected a sensor-related fault — the reported value from the named sensor is out of spec.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

Because P0717 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

The P0717 fault code is activated when the Transmission Control Module (TCM) fails to receive a signal from the input/turbine speed sensor. This sensor is essential for monitoring the speed of the transmission's input shaft or turbine, which is crucial for the TCM to correctly manage gear shifts and control transmission operations. The 'no signal' condition indicated by this code suggests a complete interruption or absence of the signal from the sensor, potentially due to a sensor failure, disconnection, or severe wiring issue. This lack of signal can severely affect the transmission's ability...

Join TaT to view the complete code information and diagnostic details.

Quick Facts