Code Definition

P1297 — Electrical Load Detector Circuit Input Low

System: Powertrain  |  Type: Manufacturer-Specific  |  Make: Isuzu

About P1297

P1297 is a manufacturer-specific powertrain diagnostic trouble code recorded for Isuzu vehicles. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P1297 is stored, the module has detected a signal or supply voltage lower than the expected operating range.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

P1297 is a manufacturer-specific code. The same code string on a different make may have a different meaning. Always confirm the code's definition against the vehicle's service information for the specific make and model under test.

Code Information

The Electrical Load Detector (ELD) measures the total electrical current drawn from the charging system and reports it to the ECM as a varying voltage, allowing the ECM to manage alternator output and idle to match electrical demand. DTC P1297 sets when the ECM detects the ELD signal voltage is below its expected range, indicating an input low condition on the ELD circuit. The ELD is usually mounted in the underhood fuse and relay box and shares a supply and ground path with the ECM. When this code sets the ECM loses accurate load information, which can affect charging control and idle quality...

Join TaT to view the complete code information and diagnostic details.

Quick Facts