Code Definition

P012A — Turbocharger/ supercharger pressure sensor signal error

System: Powertrain  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About P012A

P012A is a generic (obd-ii standard) powertrain diagnostic trouble code. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P012A is stored, the module has detected a sensor-related fault — the reported value from the named sensor is out of spec.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

Because P012A is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

This fault code is set when the engine control module (ECM) detects a malfunction in the circuit of the turbocharger or supercharger boost pressure sensor. The error typically indicates that the sensor's signal is out of the expected range, either too high, too low, or erratic. This sensor is critical for monitoring the pressure of the air being forced into the engine by the turbocharger or supercharger, and an incorrect signal can lead to improper engine performance, reduced efficiency, or potential damage. The issue could be due to a faulty sensor, problems in the wiring or connectors, or an...

Join TaT to view the complete code information and diagnostic details.

Quick Facts