Code Definition

P0824 — Gear Lever Y Position Circuit Intermittent

System: Powertrain  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About P0824

P0824 is a generic (obd-ii standard) powertrain diagnostic trouble code. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P0824 is stored, the module has detected an electrical-circuit fault in the wiring, connector, or driver associated with the named component.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

Because P0824 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

The P0824 fault code is set when the control module detects intermittent signals or disruptions in the gear lever Y position circuit. This condition suggests a problem with the consistency of the signal being sent from the gear lever's Y position sensor to the control module. Interruptions in the circuit's signal can be caused by a variety of electrical issues, such as poor connections, wiring faults, or issues within the sensor itself. The gear lever Y position is a key input for the transmission control module, which relies on this information to determine the current gear selection.

Quick Facts