Code Definition

P082D — Gear Lever Y Position Circuit Range/Performance

System: Powertrain  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About P082D

P082D is a generic (obd-ii standard) powertrain diagnostic trouble code. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P082D is stored, the module has detected a plausibility fault — the measured value is in the electrical range but is not consistent with expected operating behaviour.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

Because P082D is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

The gear lever position sensor reports the physical position of the electronic gear selector to the control module, often using two axes (X and Y) so the module can determine the selected gear in a gated or joystick style shifter. The Y position channel provides one of these signals as a varying voltage that the module compares against expected values for each gear position. DTC P082D is set when the Y position circuit signal falls outside its calibrated range, or does not change at the expected rate during gear selection, and the condition persists beyond the module threshold time. When this ...

Join TaT to view the complete code information and diagnostic details.

Quick Facts