Code Definition

P0830 — Clutch Pedal Switch Circuit signal 1 error

System: Powertrain  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About P0830

P0830 is a generic (obd-ii standard) powertrain diagnostic trouble code. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P0830 is stored, the module has detected an electrical-circuit fault in the wiring, connector, or driver associated with the named component.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

Because P0830 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

This fault code is set when the control module detects a malfunction in the circuit of the clutch pedal switch 'A'. The clutch pedal switch is responsible for indicating the position of the clutch pedal to the control module, typically to disengage the starter safety lockout or control the cruise control system. A circuit error indicates that the control module is receiving an incorrect signal from the switch, which could be due to a faulty switch, an open or short in the circuit, or a poor electrical connection.

Quick Facts