Code Definition

P0835 — Clutch Pedal Switch B Circuit High Signal 2

System: Powertrain  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About P0835

P0835 is a generic (obd-ii standard) powertrain diagnostic trouble code. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P0835 is stored, the module has detected a signal or supply voltage higher than the expected operating range.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

Because P0835 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

This fault code is triggered when the control module detects a high voltage condition in the circuit of the clutch pedal switch 'B'. The 'circuit high' indication means that the voltage in the switch's circuit is exceeding the normal operational range. This could be due to a short to power, a malfunction within the switch itself that causes it to send an incorrect signal, or issues in the wiring and connectors resulting in excessive voltage in the circuit.

Quick Facts