Code Definition

P0366 — Camshaft position sensor signal out of range bank 1 sensor 2

System: Powertrain  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About P0366

P0366 is a generic (obd-ii standard) powertrain diagnostic trouble code. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P0366 is stored, the module has detected a plausibility fault — the measured value is in the electrical range but is not consistent with expected operating behaviour; a bank-specific fault, meaning it applies only to one cylinder bank of a multi-bank engine; and a sensor-related fault — the reported value from the named sensor is out of spec.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

Because P0366 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

The powertrain control module (PCM) sets P0366 when the camshaft position (CMP) sensor 'B' (exhaust camshaft) for Bank 1 provides a signal that is out of the expected range. This could be due to an erratic, weak, or incorrect signal, affecting engine timing and performance. Symptoms may include rough running, hesitation, misfires, or difficulty starting.

Quick Facts