Code Definition

P0367 — Camshaft position sensor signal low bank 1 sensor 2

System: Powertrain  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About P0367

P0367 is a generic (obd-ii standard) powertrain diagnostic trouble code. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P0367 is stored, the module has detected a signal or supply voltage lower than the expected operating range; a bank-specific fault, meaning it applies only to one cylinder bank of a multi-bank engine; and a sensor-related fault — the reported value from the named sensor is out of spec.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

Because P0367 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

The powertrain control module (PCM) sets P0367 when the camshaft position (CMP) sensor 'B' (exhaust camshaft) for Bank 1 sends a signal voltage lower than the expected threshold. This may be caused by a weak or missing signal, a short to ground, or a sensor power issue. A low CMP signal can lead to improper timing, rough running, or difficulty starting.

Quick Facts