Code Definition

P044B — EGR temperature sensor signal out of range sensor 3

System: Powertrain  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About P044B

P044B is a generic (obd-ii standard) powertrain diagnostic trouble code. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P044B is stored, the module has detected a plausibility fault — the measured value is in the electrical range but is not consistent with expected operating behaviour; and a sensor-related fault — the reported value from the named sensor is out of spec.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

Because P044B is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

This fault code is set when the engine control module (ECM) detects that the signal from the Exhaust Gas Recirculation (EGR) temperature sensor (Sensor 3) is out of the expected range. This means that the sensor's signal is either too high or too low compared to what the ECM expects under normal operating conditions. The ECM uses this sensor to monitor the temperature of the exhaust gases being recirculated and relies on accurate readings for efficient engine performance and emissions control.

Quick Facts