Code Definition

P044F — Secondary air injection control valve Circuit high Circuit A

System: Powertrain  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About P044F

P044F is a generic (obd-ii standard) powertrain diagnostic trouble code. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P044F is stored, the module has detected a signal or supply voltage higher than the expected operating range.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

Because P044F is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

This fault code indicates that the engine control module (ECM) has detected an abnormally high voltage condition in the control circuit of the secondary air injection system's control valve, specifically in Circuit A. This high voltage signal suggests an electrical problem, such as an open circuit, or a failure within the valve's control circuit. The secondary air injection system is responsible for injecting air into the exhaust system to aid in reducing emissions, particularly during cold starts. A high voltage in the control circuit can affect the system's ability to regulate this process e...

Join TaT to view the complete code information and diagnostic details.

Quick Facts