Code Definition

P0A34 — Drive motor B temperature sensor signal intermittent

System: Powertrain  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About P0A34

P0A34 is a generic (obd-ii standard) powertrain diagnostic trouble code. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P0A34 is stored, the module has detected a sensor-related fault — the reported value from the named sensor is out of spec.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

Because P0A34 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

The powertrain or motor control module monitors the Drive Motor B temperature sensor, a thermistor used for motor thermal protection and torque management. DTC P0A34 sets when the module detects the sensor signal is intermittent or unstable, showing sudden drops, spikes, or erratic voltage changes that do not match the expected temperature behaviour. Because the fault is intermittent it usually stems from a marginal connection or harness problem that only disrupts the signal under vibration, thermal expansion, or motion. When the code is set the module may briefly substitute a default temperat...

Join TaT to view the complete code information and diagnostic details.

Quick Facts