Code Definition

P0910 — Gate Select Actuator Circuit Open [left / right motion]

System: Powertrain  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About P0910

P0910 is a generic (obd-ii standard) powertrain diagnostic trouble code. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P0910 is stored, the module has detected an open (broken or disconnected) electrical path in the monitored circuit.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

Because P0910 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

The P0910 fault code is set when the transmission control module (TCM) detects an open circuit in the gate select actuator circuit, specifically related to the control of left/right motion of the gear selector. This code points to a disruption or a complete lack of electrical continuity in the circuit that operates the actuator responsible for the lateral movement of the gear selector in vehicles with manual or semi-automatic transmissions. An open circuit in the gate select actuator can result in the inability to properly select gears, as the lateral movement of the gear selector is essential...

Join TaT to view the complete code information and diagnostic details.

Quick Facts