Code Definition

P0911 — Gate Select Actuator Circuit Range/Performance

System: Powertrain  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About P0911

P0911 is a generic (obd-ii standard) powertrain diagnostic trouble code. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P0911 is stored, the module has detected a plausibility fault — the measured value is in the electrical range but is not consistent with expected operating behaviour.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

Because P0911 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

The P0911 fault code is set when the transmission control module (TCM) detects an issue with the range or performance of the gate select actuator circuit, which controls the left/right motion of the gear selector. This circuit is crucial in vehicles with manual or semi-automatic transmissions, as it manages the lateral movements of the gear selector for proper gear engagement. The code suggests that the electrical signals within the circuit are not within the expected parameters or are performing inadequately. This can lead to difficulties in selecting gears correctly or issues with the transm...

Join TaT to view the complete code information and diagnostic details.

Quick Facts