Code Definition

P0A84 — Hybrid battery pack cooling fan 1 circuit low

System: Powertrain  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About P0A84

P0A84 is a generic (obd-ii standard) powertrain diagnostic trouble code. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P0A84 is stored, the module has detected a signal or supply voltage lower than the expected operating range.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

Because P0A84 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

Hybrid battery cooling fan 1 is switched by the Battery Energy Control Module or hybrid control module, which monitors the fan control line for the expected voltage based on the command status. DTC P0A84 sets when the module detects a voltage lower than the calibrated threshold on that circuit, whether the fan is commanded off or on. This indicates an open circuit, high resistance, or a short to ground on the fan power, control, or ground circuit, or a fault in the fan motor, relay, or driver. With fan 1 circuit faulty the battery cooling capacity can be reduced, so the module flags the loss o...

Join TaT to view the complete code information and diagnostic details.

Quick Facts