Code Definition

P0A86 — 14 volt power module current sensor signal error

System: Powertrain  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About P0A86

P0A86 is a generic (obd-ii standard) powertrain diagnostic trouble code. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P0A86 is stored, the module has detected a sensor-related fault — the reported value from the named sensor is out of spec.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

Because P0A86 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

On a hybrid or electric vehicle the 14 volt power module is the DC to DC converter that steps the high voltage down to supply the 12V system, and a current sensor inside it monitors the output current delivered to the 12V battery and loads. DTC P0A86 sets when the PCM or hybrid control module detects an abnormal or implausible signal from that current sensor. It is typically triggered when the sensor output is out of the expected range, inconsistent with system load, missing, or erratic, indicating a circuit issue or a sensor failure. The fault can affect 12V charging management, and the modul...

Join TaT to view the complete code information and diagnostic details.

Quick Facts