Code Definition

P054A — Exhaust camshaft over advanced - Bank 1. Sensor 2

System: Powertrain  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About P054A

P054A is a generic (obd-ii standard) powertrain diagnostic trouble code. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P054A is stored, the module has detected a bank-specific fault, meaning it applies only to one cylinder bank of a multi-bank engine; and a sensor-related fault — the reported value from the named sensor is out of spec.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

Because P054A is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

Fault code P054A is set when the vehicle's powertrain control module (PCM) detects that the exhaust camshaft position for Bank 1 is more advanced than what the PCM expects. This condition is typically monitored by the camshaft position sensor 2 on Bank 1. An over-advanced camshaft position can occur due to issues within the camshaft timing mechanism, potentially affecting engine performance, fuel efficiency, and emissions. Bank 1 usually refers to the side of the engine where the first cylinder is located.

Quick Facts