Code Definition

B1095 — Right Front Instrument Panel Audio Output 8 Circuit

System: Body  |  Type: Manufacturer-Specific  |  Make: Ford

About B1095

B1095 is a manufacturer-specific body diagnostic trouble code recorded for Ford vehicles. It belongs to the B-prefix family of codes, which covers body, interior, airbag, or comfort-electronics faults.

When B1095 is stored, the module has detected an electrical-circuit fault in the wiring, connector, or driver associated with the named component.

Scanning & clearing: Body (B) codes are often stored in the body control module, airbag module, or climate module. A basic OBD-II tool usually will not read body codes — an enhanced or OEM-level scan tool is typically required.

B1095 is a manufacturer-specific code. The same code string on a different make may have a different meaning. Always confirm the code's definition against the vehicle's service information for the specific make and model under test.

Code Information

The radio module (Up Level Audio or Navigation unit) monitors its discrete speaker output circuits and sets DTC B1095 when it detects a fault on the right front instrument panel speaker output, known as channel 8. The fault is set when the module detects a short to ground, a short to battery voltage, or an open circuit or high resistance condition that persists beyond the module's diagnostic timeout, with ignition in accessory or run position or with Retained Accessory Power active, and system voltage between 9V and 16V. The right front instrument panel speaker is typically a small dash mounte...

Join TaT to view the complete code information and diagnostic details.

Quick Facts