Code Definition

P1101 — MAF Sensor Out Of Self Test Range./KOER Not Able To Complete KOER Aborted

System: Powertrain  |  Type: Manufacturer-Specific  |  Make: Generic

About P1101

P1101 is a manufacturer-specific powertrain diagnostic trouble code. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P1101 is stored, the module has detected a plausibility fault — the measured value is in the electrical range but is not consistent with expected operating behaviour; and a sensor-related fault — the reported value from the named sensor is out of spec.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

P1101 is a manufacturer-specific code. The same code string on a different make may have a different meaning. Always confirm the code's definition against the vehicle's service information for the specific make and model under test.

Code Information

The P1101 fault code indicates a specific issue related to the Mass Air Flow (MAF) sensor circuit range/performance. This code is set when the Powertrain Control Module (PCM) detects that the MAF sensor signal is out of the expected range or performing inconsistently. This can mean that the actual airflow going into the engine is not aligning with the airflow readings the PCM is receiving from the MAF sensor. Proper MAF sensor function is vital for accurate air-fuel mixture calculations and efficient engine performance.

Quick Facts