Code Definition

P1102 — MAF Sensor In Range But Lower Than Expected

System: Powertrain  |  Type: Manufacturer-Specific  |  Make: Generic

About P1102

P1102 is a manufacturer-specific powertrain diagnostic trouble code. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P1102 is stored, the module has detected a signal or supply voltage lower than the expected operating range; a plausibility fault — the measured value is in the electrical range but is not consistent with expected operating behaviour; and a sensor-related fault — the reported value from the named sensor is out of spec.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

P1102 is a manufacturer-specific code. The same code string on a different make may have a different meaning. Always confirm the code's definition against the vehicle's service information for the specific make and model under test.

Code Information

The P1102 fault code is indicative of a Mass Air Flow (MAF) sensor issue, specifically noting that the MAF sensor is within its operational range but the signal is lower than expected. This condition implies that while the sensor is functioning, the airflow being measured and reported to the Powertrain Control Module (PCM) is less than what the PCM anticipates under current operating conditions. This discrepancy can affect the air-fuel ratio, impacting engine performance and efficiency.

Quick Facts