Code Definition

B1039 (64) — Dynamic Switch Control Enter-Signal Plausibility Failure

System: Body  |  Type: Manufacturer-Specific  |  Make: Alfa Romeo

About B1039

B1039 is a manufacturer-specific body diagnostic trouble code recorded for Alfa Romeo vehicles. It belongs to the B-prefix family of codes, which covers body, interior, airbag, or comfort-electronics faults.

Scanning & clearing: Body (B) codes are often stored in the body control module, airbag module, or climate module. A basic OBD-II tool usually will not read body codes — an enhanced or OEM-level scan tool is typically required.

B1039 is a manufacturer-specific code. The same code string on a different make may have a different meaning. Always confirm the code's definition against the vehicle's service information for the specific make and model under test.

Code Information

The Body Control Module (BCM) monitors the Dynamic Switch Control enter signal circuit, which indicates driver input on the multifunction switch cluster used for drive mode selection, menu navigation, and other interactive controls. The BCM checks that the signal state is plausible against expected voltage thresholds and against the state of the other contact pairs in the same switch assembly. DTC B1039:64 is set when the input no longer makes logical sense, for example simultaneous high and low voltage readings on the same line, a reading outside both the asserted and released bands, or a sig...

Join TaT to view the complete code information and diagnostic details.

Quick Facts