Code Definition

P1214 — Pedal Position Sensor B Circuit Intermittent

System: Powertrain  |  Type: Manufacturer-Specific  |  Make: Generic

About P1214

P1214 is a manufacturer-specific powertrain diagnostic trouble code. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P1214 is stored, the module has detected a sensor-related fault — the reported value from the named sensor is out of spec.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

P1214 is a manufacturer-specific code. The same code string on a different make may have a different meaning. Always confirm the code's definition against the vehicle's service information for the specific make and model under test.

Code Information

This code relates to the accelerator pedal position sensor, specifically the B signal circuit, within the electronic throttle control system. The accelerator pedal module contains two or more position sensors that provide the module with redundant signals indicating how far the driver has pressed the pedal, and sensor B is one of these signals. DTC P1214 is set when the module detects an intermittent fault in the pedal position sensor B circuit, meaning the signal cuts out, drops, or becomes erratic momentarily rather than being permanently faulted. This is commonly caused by loose or corroded...

Join TaT to view the complete code information and diagnostic details.

Quick Facts