Code Definition

C1270 — Motor # 1 Input Circuit Failure

System: Chassis  |  Type: Manufacturer-Specific  |  Make: Ford

About C1270

C1270 is a manufacturer-specific chassis diagnostic trouble code recorded for Ford vehicles. It belongs to the C-prefix family of codes, which covers chassis, braking, steering, suspension, or stability-control faults.

When C1270 is stored, the module has detected an electrical-circuit fault in the wiring, connector, or driver associated with the named component.

Scanning & clearing: Chassis (C) codes are stored in the ABS, traction control, or stability-control modules. An enhanced or OEM-level scan tool is usually required to read and clear them.

C1270 is a manufacturer-specific code. The same code string on a different make may have a different meaning. Always confirm the code's definition against the vehicle's service information for the specific make and model under test.

Code Information

The Anti-lock Brake System (ABS) module monitors the operating state of the number one ABS pump motor through a dedicated input circuit that provides feedback on whether the motor is actually running when commanded. DTC C1270 is set when the ABS module commands the pump motor on but the feedback input does not respond as expected, or when the feedback input shows the motor running while it should be off. This typically points to a broken feedback wire, a failed pump motor, or loss of the motor monitor signal from the relay or driver circuit. With the feedback compromised the ABS module disable...

Join TaT to view the complete code information and diagnostic details.

Quick Facts