Code Definition

C1872 — Air Suspension Gate Solenoid Output Circuit Short To Ground

System: Chassis  |  Type: Manufacturer-Specific  |  Make: Ford

About C1872

C1872 is a manufacturer-specific chassis diagnostic trouble code recorded for Ford vehicles. It belongs to the C-prefix family of codes, which covers chassis, braking, steering, suspension, or stability-control faults.

When C1872 is stored, the module has detected a short-circuit (voltage pulled to ground or to supply) in the monitored circuit.

Scanning & clearing: Chassis (C) codes are stored in the ABS, traction control, or stability-control modules. An enhanced or OEM-level scan tool is usually required to read and clear them.

C1872 is a manufacturer-specific code. The same code string on a different make may have a different meaning. Always confirm the code's definition against the vehicle's service information for the specific make and model under test.

Code Information

This code relates to the air suspension system. The air suspension control module operates a gate solenoid, an isolation valve in the valve block that opens and closes the air passages between the compressor, reservoir, and the air springs so the module can direct airflow during leveling. DTC C1872 sets when the module detects that the gate solenoid output circuit is shorted to ground, drawing excessive current or holding the controlled output low when it should not be. This is usually caused by the control wire chafing against a grounded surface, an internally shorted solenoid, or connector c...

Join TaT to view the complete code information and diagnostic details.

Quick Facts