Code Definition

C1877 — Air Suspension LF Air Spring Solenoid Output Circuit Failure

System: Chassis  |  Type: Manufacturer-Specific  |  Make: Ford

About C1877

C1877 is a manufacturer-specific chassis diagnostic trouble code recorded for Ford vehicles. It belongs to the C-prefix family of codes, which covers chassis, braking, steering, suspension, or stability-control faults.

When C1877 is stored, the module has detected an electrical-circuit fault in the wiring, connector, or driver associated with the named component.

Scanning & clearing: Chassis (C) codes are stored in the ABS, traction control, or stability-control modules. An enhanced or OEM-level scan tool is usually required to read and clear them.

C1877 is a manufacturer-specific code. The same code string on a different make may have a different meaning. Always confirm the code's definition against the vehicle's service information for the specific make and model under test.

Code Information

The air suspension control module sets ride height at each corner by operating a dedicated air spring solenoid valve that admits or releases air. DTC C1877 sets when the module detects a general failure in the left front air spring solenoid output circuit, such as an open circuit, incorrect current draw, or a driver feedback that does not match the commanded state. The module monitors the voltage and current on the low side output and reports a circuit failure when the expected load is missing or the feedback is out of range. When this code is stored the left front corner may sag, sit high, or...

Join TaT to view the complete code information and diagnostic details.

Quick Facts