Code Definition

C1893 — Air Suspension LR Height Sensor Circuit Failure

System: Chassis  |  Type: Manufacturer-Specific  |  Make: Ford

About C1893

C1893 is a manufacturer-specific chassis diagnostic trouble code recorded for Ford vehicles. It belongs to the C-prefix family of codes, which covers chassis, braking, steering, suspension, or stability-control faults.

When C1893 is stored, the module has detected a sensor-related fault — the reported value from the named sensor is out of spec.

Scanning & clearing: Chassis (C) codes are stored in the ABS, traction control, or stability-control modules. An enhanced or OEM-level scan tool is usually required to read and clear them.

C1893 is a manufacturer-specific code. The same code string on a different make may have a different meaning. Always confirm the code's definition against the vehicle's service information for the specific make and model under test.

Code Information

The air suspension system uses a left rear ride height sensor to report the rear corner height to the air suspension control module so it can add or vent air and keep the vehicle level. DTC C1893 sets when the module detects a general fault in the left rear height sensor circuit, such as an open, a short, or an out of range signal that does not correspond to suspension travel. The sensor is typically a rotary unit linked to the suspension arm that returns a varying signal as the corner moves through its range. When this code is set the rear of the vehicle may sit low or fail to level, a suspen...

Join TaT to view the complete code information and diagnostic details.

Quick Facts