Code Definition

B1270 — Servo Motor Potentiometer Defrost Circuit Short To Battery

System: Body  |  Type: Manufacturer-Specific  |  Make: Generic

About B1270

B1270 is a manufacturer-specific body diagnostic trouble code. It belongs to the B-prefix family of codes, which covers body, interior, airbag, or comfort-electronics faults.

When B1270 is stored, the module has detected a short-circuit (voltage pulled to ground or to supply) in the monitored circuit.

Scanning & clearing: Body (B) codes are often stored in the body control module, airbag module, or climate module. A basic OBD-II tool usually will not read body codes — an enhanced or OEM-level scan tool is typically required.

B1270 is a manufacturer-specific code. The same code string on a different make may have a different meaning. Always confirm the code's definition against the vehicle's service information for the specific make and model under test.

Code Information

The HVAC mode door servo motor uses an internal potentiometer to provide position feedback to the climate control module, allowing the module to know the actual position of the defrost mode door and drive the servo to the commanded position. The potentiometer is supplied with a 5V reference voltage, a ground return, and a wiper feedback signal that varies as the door sweeps from fresh air through to defrost. DTC B1270 is set when the climate control module detects the wiper feedback voltage rising above its expected operating window in a manner consistent with the signal wire being shorted to ...

Join TaT to view the complete code information and diagnostic details.

Quick Facts