Code Definition

B1276 — Servo Motor Potentiometer Foot Circuit Failure

System: Body  |  Type: Manufacturer-Specific  |  Make: Generic

About B1276

B1276 is a manufacturer-specific body diagnostic trouble code. It belongs to the B-prefix family of codes, which covers body, interior, airbag, or comfort-electronics faults.

When B1276 is stored, the module has detected an electrical-circuit fault in the wiring, connector, or driver associated with the named component.

Scanning & clearing: Body (B) codes are often stored in the body control module, airbag module, or climate module. A basic OBD-II tool usually will not read body codes — an enhanced or OEM-level scan tool is typically required.

B1276 is a manufacturer-specific code. The same code string on a different make may have a different meaning. Always confirm the code's definition against the vehicle's service information for the specific make and model under test.

Code Information

The Body Control Module (BCM) or HVAC control module sets this code when it detects an invalid or out of range signal from the foot mode door servo motor's internal position potentiometer. The foot mode door routes cabin airflow toward the floor outlets, and the potentiometer reports the actual door position back to the controller as a variable voltage typically between 0.5V and 4.5V referenced to a 5V supply. The code sets when the signal falls outside that operating range, when it does not change in response to a commanded movement, or when the circuit is electrically open. Drivers may notic...

Join TaT to view the complete code information and diagnostic details.

Quick Facts