Code Definition

B127E — Front Video Display Output Signal Malfunction

System: Body  |  Type: Manufacturer-Specific  |  Make: Holden

About B127E

B127E is a manufacturer-specific body diagnostic trouble code recorded for Holden vehicles. It belongs to the B-prefix family of codes, which covers body, interior, airbag, or comfort-electronics faults.

Scanning & clearing: Body (B) codes are often stored in the body control module, airbag module, or climate module. A basic OBD-II tool usually will not read body codes — an enhanced or OEM-level scan tool is typically required.

B127E is a manufacturer-specific code. The same code string on a different make may have a different meaning. Always confirm the code's definition against the vehicle's service information for the specific make and model under test.

Code Information

On Holden vehicles, the Infotainment Control Module or Human Machine Interface (HMI) monitors the front video display output circuit to ensure correct signal transmission to the centre display screen. DTC B127E is set when the module detects an invalid, missing, or unstable video output signal for a calibrated period while the display is commanded ON. This fault indicates a malfunction in the video signal path rather than a simple power or ground failure, and may result in a blank screen, intermittent display operation, distorted image, or loss of graphical output.

Quick Facts