Code Definition

B1358 — Ignition Run Circuit Short To Ground

System: Body  |  Type: Manufacturer-Specific  |  Make: Generic

About B1358

B1358 is a manufacturer-specific body diagnostic trouble code. It belongs to the B-prefix family of codes, which covers body, interior, airbag, or comfort-electronics faults.

When B1358 is stored, the module has detected a short-circuit (voltage pulled to ground or to supply) in the monitored circuit.

Scanning & clearing: Body (B) codes are often stored in the body control module, airbag module, or climate module. A basic OBD-II tool usually will not read body codes — an enhanced or OEM-level scan tool is typically required.

B1358 is a manufacturer-specific code. The same code string on a different make may have a different meaning. Always confirm the code's definition against the vehicle's service information for the specific make and model under test.

Code Information

The Body Control Module (BCM) monitors the ignition run circuit, which provides switched battery voltage to the BCM whenever the ignition switch is rotated to the RUN position. The BCM uses this voltage to determine when the vehicle is operational, gating accessory power, dash lamp control, and immobiliser based engine starting. DTC B1358 sets when the BCM detects the ignition run input pulled to ground while the ignition switch is commanding voltage onto the circuit, indicating the wire is shorted to chassis ground somewhere between the switch contacts, the protection fuse, and the BCM input ...

Join TaT to view the complete code information and diagnostic details.

Quick Facts